SigaPox

SigaPox stands for a wide range of Epoxy based products, including resins and flooring systems with high chemical, thermal and mechanical resistance.

SigaPox resin systems are universally used in a wide range of viscosities as a primer, scratch coat and mortar binder by mixing with aggregates.

SigaPox flooring systems are aesthetic and of high quality with excellent chemical and thermal resistance, compressive strength and slip resistance.

The outstanding properties of SigaPox flooring systems are used in industrial and commercial areas, in the pharmaceutical industry and for laboratories, in public buildings such as schools, hospitals, kindergartens, shopping malls and other demanding indoor projects.

SigaPox 410

All-purpose 2-component epoxy resin for base coats, scratch coats, and as repair mortar

SigaPox 410 is a high-quality, solvent-free, all-purpose usable, 2-component epoxy resin. SigaPox 410 is suitable as base coat, for scratch coats, or as levelling mortar for new construction sites, as well as for reconstruction work. Due to its low viscosity and good wettability properties the resin penetrates in the substrate and results in a high-strength foundation for subsequent coatings. SigaPox 410 is our first recommendation, already for years now, for substrate preparation. The material is very reliable under various construction site conditions.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 411

2-component epoxy resin as base coat, filler, and reactive resin mortar

SigaPox 411 is an unfilled, low-viscosity, and non-pigmented epoxy resin for base coats, scratch coats, and heavy-layered levelling screeds. SigaPox 411 features good wettability properties and may be filled up to a high grade. Nevertheless it offers good processing properties. SigaPox 411 cures very well and consistently, and features good adhesion to mineral substrate. To improve interlayer adhesion it is basically recommended to scatter with fire-dried quartz sand, grain size 0.3/0.8 mm.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 412

Moisture-tolerant special base coat

SigaPox 412 is a 2-component epoxy resin. The material is highly moisture tolerant. SigaPox 412 humidifies matt-damp surfaces, blocks water, and leads to excellent adhesion. In combination with the degreaser SigaMot 950 oily substrate can be cleaned. Afterwards a base coat can be applied. Because of the very good penetration capability and high wettability properties the material stands the test on critical substrate. The material offers increased adhesive strength for substrate with lacking solidity. Because of its medium viscosity the material is suitable for scratch coats and as a wet bonding course for bonded screed. Good adhesion on blasted steel.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 413

Moisture-tolerant, rapid-setting, 2-component epoxy resin special primer

SigaPox 413 is a rapid-setting 2-component epoxy resin. Highly moisture tolerable. SigaPox 413 humidifies matt- damp surfaces, blocks water, and leads to excellent adhesion. It is available as an alternative product to SigaPox 412 and is adjusted with rapid curing features. The material combines good adhesion and wettability properties and allows subsequent processing within 4 - 6 hours. SigaPox 413 is suitable for critical substrate for temperatures above 5 °C / 41 °F. The product is preferably applicable for concrete and screed if a bonding course needs to be reached rapidly. Because of the medium viscosity the material is suitable for scratch coats and as a wet bonding course for bonded screed. SigaPox 413 offers very good adhesion on sand-blasted steel.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 415

Rapid-setting, 2-component epoxy resin for base coats, scratch coats, and as repair mortar

SigaPox 415 is a 2-component, solvent-free epoxy resin, setting at lower temperatures and rapid-setting at regular temperatures. Suitable for base coats and levelling coats where a speedy return for subsequent coatings is needed. SigaPox 415 may usually be accessed after only 2 - 4 hours for subsequent coating work. Therefore the material offers a considerable time advantage against other base coats. The time advantage of SigaPox 415 is especially considerable on small areas and for reconstruction with a small time frame for fitting and curing. SigaPox 415 cures even at lower temperatures above 0 °C / 32 °F dependably, which is beneficial during the cold season.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 416

2-component epoxy resin base coat, low-emission

SigaPox 416 is a high-quality low-emission, and all-purpose applicable, 2-component epoxy resin based on the exceptionally established SigaPox 410. Use SigaPox 416 as base coat, for scratch coats, or as levelling mortar for reconstruction or new constructions. Due to its low-viscosity and good wettability properties the resin penetrates very well into the substrate and develops a high-strength base for subsequent coatings.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 417

2-component epoxy resin emulsion base coat, rapid-setting

SigaPox 417 is a 2-component, ready-to-use, and rapid-setting, solvent-free epoxy resin emulsion. SigaPox 417 is used as base coat prior to the application of water vapour permeable coatings and sealers. In combination with SigaPox 482 and SigaPox 433 water vapour permeable coatings may be generated. Use SigaPox 417 predominantly when vapour tight base coats are not suitable. Necessary within the system on water vapour permeable coatings, e.g. on damp, early age concrete, magnesia substrate, susceptible to moisture and similar substrate.  The product cures by dehydration of the contained water and subsequent chemical cross-linking into a consistent, robust film with good adhesion. Due to its penetrating adjustment the substrate will be very well dampened, resulting in an excellent adhesive foundation for subsequent coatings. Absorbency will be reduced, dust will be bound. In addition the subsequent coating will result in a smooth, sealed surface for spread coatings. SigaPox 417 cures rapidly, within 2 - 7 hours, ready for subsequent coatings. The end of pot-life is not visible. Excellent adhesion on different substrate, like concrete, cement screed, magnesia and similar screed, as well as on older synthetic resin coatings. SigaPox 417 results in a hard, physiologically harmless film. The cured coating offers resistance to water, aqueous salt solutions, diluted acids and bases. Conditionally resistant to solvents.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 418

Electrically highly conductive 2-component epoxy resin base coat, low-emission

SigaPox 418 is a product used in combination. Suitable for electrically conductive coatings. The highly conductive base coat is used as an interlayer applied on cured base or scratch coats with affixed copper bands. The highly diagonally conductance compensates the superposed coatings. SigaPox 418 consists of an easy to process and economical 2-component epoxy resin emulsion which may be applied with a roller. Because of its composition a good interlayer adhesion is achieved and solvents are not in use.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 419

Low-emission, 2-component epoxy resin special primer with higher moisture tolerance for fresh substrates, substrates with an increased humidity or weak

SigaPox 419 is a new, low-emission, 2-component epoxy resin special primer. The product is modelled after our trusted SigaPox 412 primer. Like SigaPox 412, SigaPox 419 has an excellent wetting behaviour and penetrating power on the most diverse substrates. Due to its high humidity tolerance, the primer is particularly suitable for fresh substrates with a high humidity. SigaPox 419 corresponds to the latest generation of low-emission epoxy resins, and it is free of solvents, benzyl alcohol, and alkyl- phenols. SigaPox 419 can be used as primer and scratch coat before the installation of other coatings. As a highly adhesive primer, it is particularly suitable also in the renovation of substrates. The adhesion strength can often be improved by the primer. The primer can be used as osmotic braking and vapour barrier primer for the preparation of coatings as well as with other coverings. If necessary, the installation has to be carried out in two times. The primer can be used on fresh concrete up to a max. 6 CM-%, so that the special requirements can be met. If necessary, seek advice! SigaPox 419, used in combination with other layers, serves a low-emission barrier. In combination with the degreasing agent SigaMot 950, oil contaminated substrate are first cleaned, and subsequently primed with SigaPox 419.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 420 / SigaPox 420 RAPID

Pigmented 2-component epoxy resin self-levelling-coating
Rapid-setting, pigmented 2-component epoxy resin self-levelling-coating

SigaPox 420 and SigaPox 420 RAPID are solvent-free, self-levelling, 2-component, epoxy resin coatings for hard and smooth surface finishes, as well as for scattered, slip resistant finishes. Especially suitable for industrial areas. The material offers excellent self-levelling and smoothing properties. SigaPox 420 offers regular processing and curing time. SigaPox 420 RAPID offers the more rapid curing alternative. Both coating materials may be filled with quartz sand (grain size 0.1/0.3 mm), beneficial and economical for layers above 2 mmBoth high-quality standard materials offer well-balanced properties. The cured coating offers very good resistance to mechanical load and good resistance to different chemicals. The coating is resistant to water, salts, salt solutions, alkalis and bases, as well as diluted mineral acids, such as hydrochloric and sulphuric acid. Good resistance to many solvents such as benzene, fuel, grease, oil, and so on. Limited resistance to concentrated mineral acids, diluted organic acids such as acetic acid, lactic acid, and so on. Not permanently resistant to chlorinated hydrocarbons, ester, concentrated nitric acid, and so on. Please obtain advice for any special requirements to resistance. SigaPox 420 and SigaPox 420 RAPID can be supplied in a variety of colours although slight colour deviations may occur due to technical reasons. Epoxy resin coatings are subject to colour changes which may become visible when using pale colours and the rapid-setting version.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 421

Chemically highly resistant, 2-component epoxy resin coating for WHG-applications (Water Household Act)

SigaPox 421 is a crack-bridging and solvent-free, 2-component epoxy resin flow-coat with very good chemical resistance. The coating is suitable for the application in collection trays and -rooms such as production / handling areas and storage / handling areas which have to be equipped with coating systems tested in accordance with the WHG. The coating is suitable for fork-lift traffic. SigaPox 421 offers very good resistance to chemicals. The material is resistant to solvents, oil, mineral acids, alkalis, salts, and many others. Due to the special formula alteration in colour is possible during aging, technical properties do not change though. The effect of chemicals may cause discolouration but does not affect the function of the material. SigaPox 466 offers a conductive adjustment which can be used when electrical conductivity is required. The product is especially suitable for areas where explosion protection is required. It is also suitable for production areas with demand to electrostatic control, like in chemical and pharmaceutical storage / handling areas, production / handling areas, and other manufacturing areas with high exposure to chemicals.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 422

Chemical resistant, 2-component epoxy resin coating

SigaPox 422 is a solvent-free, 2-component epoxy resin flow coating with increased chemical resistance. The cured coating is suitable for commercially and industrially used areas with an increased demand to chemical resistance. Application is suitable for many industrially and commercially used areas where the focus is on the resistance of the coating. SigaPox 422 offers good resistance to chemicals, like e.g. alkalis, oil, grease, water, salt-solutions, and different acids. To ensure the suitability for your demand please note the resistance-chart and seek technical advice. If explosion prevention is needed, the electrically conductive product SigaPox 460 offers an alternative.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 430

All-purpose, pigmented 2-component epoxy resin coating and top coat

SigaPox 430 is an all-purpose, solvent-free, pigmented, 2-component epoxy resin coating for hard-wearing industrial coatings. SigaPox 430 is high-quality adjusted, with very good coverage. Due to the low viscosity the product is suitable for rolled coatings, as well as top sealing coat for scattered, slip resistant coatings.
The material is suitable for smooth coatings for 1 - 4 mm layers. The coating material may be mixed with fire-dried quartz sand (grain size 0.1/0.3 mm) up to 0.7 parts by weight. Mixing with quartz sand is useful and economic for layers starting at 2 mm. The coating material has good pro- cessing-, self-levelling and smoothing properties. SigaPox 430 has well balanced properties and may be used all-purpose. Because the product is multi-purpose and has a wide range of application possibilities the amount of material to be stored may be reduced. The cured coatings are very resistant to mechanical load and different chemicals. The coating is resistant to water, salt, salt solutions, alkaline and bases, as well as diluted mineral acids, like salt or sulphuric acid. There is also a good resistance to many solvents like benzene, fuel, grease, oil, and so on. Conditional resistance to concentrated mineral acid. Short-term resistance to concentrated and diluted organic acids like formic or acetic acid. Nondurable resistance to chlorinated hydrocarbon, ester, concentrated nitric acid, and others. For special demands to resistance obtain advice. SigaPox 430 is available in different colours. Slight colour alterations may be possible due to technical reasons. Pale colour epoxy resin coatings may show slight colour alterations, which may become visible. For an epoxy resin product SigaPox 430 shows only slight colour alterations though. SigaPox 430 has been successfully tested according to the testing program DIN EN 1504-2 in regard to DIN V 18026 “surface protection system for concrete with products according to DIN EN 1504-2”, in compliance with the test category OS 8 “chemical-resistant coating for areas with vehicle traffic and mechanical high load”.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 440

2-component coating resin, solvent-free

SigaPox 440 is a pre-formulated, 2-component epoxy resin binding agent. An economical coating for commercially and industrially used floors in combination with additives. SIGAS quartz sand-mix 2/1 will be added on site to the unfilled coating depending on the particular application and thickness of layers. The unfilled binding agent combination is economically fillable. The mixture is easy to process and may be applied with a coating knife and offers very good technical properties.
The cured coating offers a very high durability and very good resistance to a wide range of chemicals. SigaPox 440 is resistant to water, salts, salt solutions, alkalis and bases, as well as diluted mineral acids like hydrochloric acid and sulphuric acid, as well as benzene, fuel, grease, oil, and so on. Conditionally resistant to concentrated mineral acids, organic acids, such as formic acid, acetic acid, and concentrated lactic acid, etc. Not permanently resistant to chlorinated hydrocarbons, esters, concentrated nitric acid. For any special requirements to resistance please obtain advice! The coating resin can be supplied non-pigmented or pigmented.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 450

High-quality 2-component epoxy resin flow-coating

SigaPox 450 is a solvent-free, pigmented flow-coating based on a 2-component epoxy resin with very good flow- and smoothing properties. Due to its good flow properties coatings starting at 1 mm can be applied depending on the demands to the floor. SigaPox 450 contains high-quality resin components and is high in binding agents. Economic solutions can be achieved by addition of fire-dried quartz sand, especially for increased layer coatings. The product features easy handling and high class appearance. Cured coatings are suitable for commercially and industrially used areas. SigaPox 450 is more formable than usual epoxy resin coatings and furthermore has an excellent wear resistance. SigaPox 450 shows good resistance to yellowing. Therefore it is very suitable for pale colour tones. SigaPox 450 offers good resistance to chemicals, e.g. to bases, oil, grease, solvents, water, salt solutions, and different acids. For any special demands to the resistance please obtain advice.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 455 / SigaPox 455 Clean

Low-emission, 2-component epoxy resin coating
Low-emission, 2-component epoxy resin coating, for the creation of jointless floors with higher hygiene requirements

SigaPox 455 is a high-quality, self-levelling, solvent-free and low-emission, 2-component epoxy resin coating for robust, smooth coatings, as well as for scattered coatings especially for the usage in industrial areas. SigaPox 455 Clean is a 2-C epoxy resin coating provided with a preventive protection against bacterial contamination. This assists the production of permanently hygienic surfaces, even between the necessary cleaning and disinfection cycles. Note: The processing information and the technical data of SigaPox 455 Clean do not differ from the standard product. The coating offers good self-levelling and smoothing properties and cures very well. SigaPox 455 may be blended with quartz sand which is beneficial and economical for layer thicknesses over 2 mm. SigaPox 455 has a well-balanced chemical resistance. The cured coating is very resistant to mechanical load and has good resistance to different chemicals. The coating is resistant to water, salt, salt solutions, alkalines and bases, grease, oil, as well as diluted mineral acid, like salt- and sulphuric acid. Short-term resistance to solvents like benzine, fuel and so on. Very short-term resistance to concentrated mineral acids, organic acids like formic acid, acetic acid, lactic acid and so on. SigaPox 455 is not resistant to chlorinated hydrocarbon, ester or nitric acid. Please obtain technical advice for chemical resistance requirements. SigaPox 455 can be provided in different colours. Note: Slight colour alterations may be possible due to technical reasons.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 460

Chemical-resistant, electrically conductive, 2-component epoxy resin coating

SigaPox 460 is a pigmented, solvent-free, electrically conductive 2-component epoxy resin flow coating with very good resistance to different chemicals. The cured coating is especially suitable for commercially and industrially used areas with antistatic or electrically conductive flooring and the requirement to very good chemical resistance at the same time. Due to the special conductive fiber technology even pale colours are available. Suitable for many different industrially used areas, e.g. rooms with flammable fluids and chemicals requiring explosion protection. The smooth coating is suitable for production areas, factories, laboratories and other areas with increased exposure to chemicals. SigaPox 460 offers good resistance to chemicals, e.g. different solvents, acids, bases, oil, grease, salt, and solutions. Please note the chart for resistance and seek advice to make sure that the coating is suitable for the desired requirements. Note: Deviation in colour tone is possible due to the conductive adjustment of SigaPox 460 Chemically resistant coatings might show colour alterations due to aging and wear and tear which will not affect any other properties though.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 466

Electrically conductive, highly chemically resistant, 2-component epoxy resin coating for WHG-applications

SigaPox 466 is a solvent-free, electrically conductive and crack-bridging, 2-component epoxy resin flow-coat with very good chemical resistance. The coating is suitable for the application in collection trays and -rooms such as production / handling areas and storage / handling areas which have to be equipped with coating systems. The conductive property ensures protection against explosion. The material is especially suitable for production areas in the chemical and pharmaceutical industry, in laboratories, but also for other manufacturing areas with high exposure to chemicals. The coating is suitable for fork-lift traffic. SigaPox 466 shows good resistance to chemicals. The material is resistant to solvents, motor fuel, oil, mineral acids, alkalis, and salts. Due to the electrically conductive adjustment alteration in colour is possible for technical reasons. Colour alteration due to aging will not change the technical properties. The effect of chemicals may cause discolouration but does not affect the properties of the material.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 470 / SigaPox 470-R10 / SigaPox 469 / SigaPox 469-R10

Pigmented 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface

Pigmented and slip resistant 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface

Clear 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface

Clear and slip resistant 2-component low-emission epoxy resin emulsion sealer for a silk-matt surface

SigaPox 469 and SigaPox 470 are both 2-component and according to the AgBB low-emission epoxy resin sealer. SigaPox 470 is used as a clear, matt top coat for reactive resin coatings. Color flakes may be added. SigaPox 469 can be used as a covering pigmented sealer on epoxy resin coatings. Both top coats result in even semi-matt surfaces, adding an even nice appearance. "Mirror effects" of glossy coatings will be considerably reduced. SigaPox 469 and SigaPox 470 may replace sealers containing solvents in many areas which offers convenient to work with and environmentally friendly alternative materials. Use short piled rollers carrying out criss-cross strokes. Aligned curing results in even surfaces. SigaPox 469 and SigaPox 470 show good adhesion on many substrates. After adhesive tensile testing the sealer may be used on older substrates as well. Sealer with an additionally slip resistance effect can be delivered with the special products SigaPox 470-R10 and SigaPox 469-R10. They are accredited with the slip resistance grade R10, according to DIN 51130 and BGR 181. Processing the epoxy coatings with a lint-free velour roller, results in an even surface with slip resistance grade R10 after curing. The product cures by drying and chemically cross-linking resulting in a sturdy consistent film with good adhesion. Completely cross-linked coatings are resistant to many chemicals, especially to water, salts, aqueous acids and alkalis, oil as well as many different solvents. Note: Sealed surfaces offer only limited resistance to mechanical load. Material handling equipment may affect or destroy the sealer. Limited extent usage. In very or frequently wet areas, as well as areas exposed to chemicals, sealers containing solvents would be more appropriate.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 473

Coloured, flexibilised 2-component epoxy resin top sealer for car park surface protection systems

SigaPox 473 is a flexible, coloured, 2-component epoxy resin top sealer for drivable scattered coatings for indoor car parks and garages. SigaPox 473 is suitable for application on scattered, flexibilised surface protection systems (OS 11a/b). The top sealer is prepared with low viscosity for good processability and demonstrates good covering power. Top sealing of sanded surfaces results in a slip-resistant and wear-resistant floor coating. SigaPox 473 is resistant to water and de-icing salts, glycols and battery acids. Alternatively, SigaFlex 545 can be used as a light-resistant top sealer variant for surface protection systems (OS 11a/b).

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 484

Universal 2-component epoxy resin primer for car park surface protection systems

SigaPox 484 is a solvent-free, unfilled and universally applicable 2-component epoxy resin primer, which is used in CAR PARK surface protection systems (OS 8, 11a/b). SigaPox 484 can be used as a primer and scratch coat in new buildings and renovation. Due to its low viscosity and good wettability, the resin penetrates the substrate very well and thus provides a high-strength base for the subsequent surface protection system. SigaPox 484 is supplied as a ready- to-use, unfilled primer. For use for scratch coats, the resin is filled with approx. 50 - 80 percentage by weight of SIGAS quartz sand-mix 2/1.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×

 

SigaPox 488

Ready-to-use 2-component epoxy resin primer for car park surface protection systems

SigaPox 488 is a 2-component epoxy resin primer for preparing substrates for subsequent car park coatings. SigaPox 488 is used as a ready-to-use primer as well as to even out roughness and for levelling. Its preferred use is for subsequent scattered coatings where sufficient levelling is achieved for the subsequent coatings, e.g. OS 8 coatings with SigaPox 430. Suitable as a primer on all moisture-resistant, dimensionally stable substrates such as concrete and cement screed. The product has very good compressive strength and is suitable for all car park surface protection system applications. However, it can also be used for smooth coatings, which requires double application for normally absorbent substrates. If a levelling compound has to be applied to even out higher levels of roughness, approx. 20 – 50 % of 0.1/0.4 mm fire-dried quartz sand can be added. SigaPox 488 provides a solid basis for all subsequent surface protection systems and coverings, hardens through quickly without shrinkage. The product has good compressive strength and is suitable for all parking, industrial and commercial flooring applications.

Technical Data Sheet

Dear User:

 Please enter your E-mail to be updated with our latest surface protection solutions!
 
Continue . . .

 

 
×